Start with product geometry
Measure the complete pack, including protrusions and any tray or support. Give the maximum and minimum dimensions in the planned range and explain how stable the pack is during transfer.
Compare shrink wrapping routes around your pack, film and working process. Learn which application details help Lancing assess a machinery proposal.
Measure the complete pack, including protrusions and any tray or support. Give the maximum and minimum dimensions in the planned range and explain how stable the pack is during transfer.
Explain whether wrapping is intended for retail presentation, grouping or protection during handling. Describe the appearance and pack behaviour you expect so the machinery discussion has a practical target.
Consider where products are loaded, where film is replenished and how finished packs are removed. Include access and working space when comparing a compact machine with a connected arrangement.
Lancing publishes chamber, L-sealing, sleeve-sealing and heat-tunnel equipment within its shrink-wrapping range. These routes should be discussed against the pack rather than treated as interchangeable machines. Start by explaining whether the objective is individual presentation, grouping or protection during handling, and supply an example of the intended result.
Record the full dimensions of the product or group, including trays and supports. Identify which formats are frequent and which are unusual. Share the film specification if it is already selected, or explain that material choice is part of the enquiry. Keep the pack and film assessed together.
A finished wrapped pack depends on the stages before and after heat is applied. Explain how film is prepared, how the pack is sealed and how it travels onward. Ask the machinery proposal to distinguish the included equipment from the operator activities and existing machinery that will support the process.
Use accepted packs per shift to express the production requirement. Include batch changes, supply replenishment and removal of finished work when describing normal operation. Ask for the proposed format range and handling arrangement to be confirmed before comparing machinery capacity or deciding how much space the installation requires.
Shrinking is only one stage. Define film preparation, sealing and product transfer so the enquiry covers the complete route from unwrapped product to finished pack.
Include trays, supports and protruding features in pack dimensions. The proposed machinery needs assessment against the complete item that will actually travel through the wrapping process.
Provide a finished example or marked photograph and explain what matters. A request for a neat wrap leaves too much room for differing interpretations during machinery selection.
Use these approaches to organise your application review. Confirm equipment suitability and scope against the actual product and pack.
| Approach | How to assess it | Consider when |
|---|---|---|
| Chamber sealing route | Lancing lists chamber sealing machinery that brings sealing and shrinking into a compact working arrangement. Ask how your products would be loaded and how the assessed pack range would be handled. | A compact wrapping discussion centred on individual products. |
| L-sealing route | An L-sealer can be discussed with a shrink tunnel as a sealing and shrinking sequence. Confirm the film format, product transfer and intended automation for the application. | Packs that suit an L-type sealing arrangement. |
| Sleeve wrapping route | For grouped products, describe the group dimensions, tray requirement and stability. Lancing publishes sleeve-sealing equipment; the proposed grouping and feed arrangement still need to be defined. | Bundles and multipacks requiring application review. |
Use these answers alongside your actual product, packaging and production requirements.
They should be assessed as different pack-making routes. An L-sealing arrangement seals and cuts film around a product before shrinking; a sleeve-wrapping brief commonly focuses on containing an assembled group or bundle. Show the desired film coverage, handling points and finished appearance. Ask the proposal to explain its actual seal layout rather than assuming that every machine sold under shrink wrapping produces the same pack.
Possibly, but the names of the products are not enough to establish a common configuration. Compare dimensions, group stability, support trays, film requirements and the loading sequence. A bottle bundle can behave differently from a rigid carton during sealing and transfer. Ask for both formats to be assessed and identify any changes, parts or limitations before treating them as one machine requirement.
Provide the complete pack, including trays, inserts, labels and any protruding features, together with the proposed film. Include formats likely to be difficult and describe the product condition at the wrapping station. Agree the acceptable appearance and handling result in advance. Assess the pack after it leaves the heat stage and has reached its normal handling condition, not only while the film is still warm.
Specify it at the beginning if several loose products must become one bundle. Record the group count, orientation, presence of a tray and how the group reaches the sealing position. A wrapper quotation should say who or what assembles and supports that group. Otherwise, the proposed machine may address the film operation while leaving the most demanding handling task outside the project scope.
A hypothetical requirement includes a rigid boxed product and a six-container transport bundle. These are proposed formats, not a customer case.
Compare the boxed product against an L-sealing route; assess the assembled bundle separately against sleeve wrapping, with its tray and grouping method specified.
The decision is about pack construction and handling. A shared output target does not establish that one configuration can process both formats.
Build a brief for your own application ↗The linked supplier information and technical references support the selection principles on this page. Confirm the final equipment and scope with Lancing.
Download your enquiry checklistDiscuss the specification with Lancing ↗
Compare the complete proposed group in each packaging construction, not only the film around an ideal sample.
Download the blank application checklist ↗
Discuss your application with Lancing
Prefer to call or email? 01494 623015 · sales@lancinguk.com
Include the tray if the production pack uses one, and identify any proposed change to its construction. A tray can alter how the group is supported during wrapping, transfer and subsequent handling. If a tray-free version is being considered, assess it as a separate pack configuration. Do not treat a successful trial of the supported group as evidence that the same items will behave identically without that support.
Show the intended carry feature, where the finished pack will be held and the complete grouped load. Explain whether the film, tray or a separate component performs the carrying function. Include that handling requirement in the pack assessment rather than judging only appearance after shrinking. A proposed wrapper route does not itself establish that a finished bundle is suitable for the intended carrying method.
Use for the individual-product route in the comparison.
Check for your application: A published option for application review; availability, final specification and price are not established here.
Explore Lancing Automatic L-Sealer MachinesUse for the proposed grouped-load route; agree tray and group preparation.
Check for your application: A published option for application review; availability, final specification and price are not established here.
Explore Lancing Automatic Sleeve Sealing MachinesTell Lancing what you need to handle, pack or produce. Start with the details you know; use the application brief to organise the rest.